If you're looking for a way to add an extra layer of protection to your windows without compromising visibility, consider installing plexiglass. Plexiglass, also known as acrylic glass, is a lightweight and shatter-resistant alternative to traditional glass. In this step-by-step guide, we'll walk you through the process of installing plexiglass over your windows.
Before you get started, gather the following materials:
Measure the length and width of your window frame and subtract 1/8 inch from each measurement. This will allow for a proper fit and prevent the plexiglass from cracking due to expansion during temperature changes.
Using a circular saw or jigsaw, carefully cut the plexiglass sheets to match the measurements of your window frame. Be sure to wear safety goggles and gloves to prevent any injuries.
Using a drill, pre-drill screw holes along the edges of the plexiglass sheets. These holes should be spaced about 6 inches apart.
Carefully place the plexiglass sheets over your window frame and secure them in place using clamps. Starting from one corner, drill screws through the pre-drilled holes and into the window frame.
If there is any excess plexiglass sticking out beyond the window frame, carefully trim it using a cutting tool.
By following these simple steps, you can easily install plexiglass over your windows for added protection. Remember to wear protective gear and handle the plexiglass sheets with care to prevent any injuries. Enjoy your newly protected windows!
