Keurig Descaling Instructions: How to Reset Your Brewer and Keep it Running Smoothly

Introduction:

Keurig coffee brewers have become a popular choice for homes and offices around the world. These brewers come in different models and sizes, but they all have one thing in common: they need to be descaled and reset regularly to keep them running smoothly. In this article, we will provide you with step-by-step instructions on how to descale and reset your Keurig brewer.

Reasons for Descaling Your Keurig Brewer:

Over time, minerals from your tap water may build up in your brewer, causing it to function poorly. Descaling your brewer will remove these minerals and ensure that your coffee always tastes fresh. If you don't descale your brewer regularly, you may experience:

• Slow brewing time
• Clogs in the water lines
• Poor water flow
• Foul tasting coffee
• Shorter brewer lifespan

How to Descaling Your Keurig Brewer:

To keep your Keurig brewer functioning well, we recommend descaling it every three to six months. Here are the steps to follow:

1. Unplug your brewer from the power source and remove any remaining water from the reservoir.
2. Mix a solution of 1:1 ratio of vinegar and water in a bowl. The amount you need depends on the size of your brewer.
3. Pour the mixture into the water reservoir of your brewer.
4. Turn on your brewer and start a brewing cycle without using a coffee pod. This will allow the vinegar and water mixture to move through the brewer's internal components.
5. Once the brewing cycle is complete, empty the contents of the bowl and rinse it with water.
6. Pour water into the reservoir and run several brewing cycles without a coffee pod to rinse out any remaining vinegar.
7. Once you're done, your brewer is descaled and ready to use again.

Resetting Your Keurig Brewer:

After descaling your Keurig brewer, you may need to reset it to ensure it's functioning properly. Here are the steps to follow:

1. Unplug your brewer from the power source.
2. Remove the water reservoir and locate the "Auto-Off" buttons. Hold down both buttons for about five seconds.
3. You will see a "Resetting..." message display on the brewer's screen. Wait for the message to disappear.
4. Once it's gone, plug the brewer back into the power source and turn it on.
5. Your Keurig brewer is now reset and ready to use.

Conclusion:

Keeping your Keurig brewer descaled and reset regularly is important to ensure it functions well and produces delicious coffee. With these simple steps, you can easily descale and reset your Keurig brewer and keep it running smoothly. Remember to descale your brewer every three to six months, or as needed, and reset it whenever you start experiencing issues. With proper maintenance, your Keurig brewer will last a long time and produce great coffee every day.